Buying Tips

Buying new furniture can be a daunting task. Use the list below to get yourself better prepared to storm the sales floor in search of quality and value.

Select Furniture Type


Buying Wood Furniture

Look for these features when buying wood furniture.

  • Kiln dried all wood construction
  • Glued mortise and tenon joints
  • Dust proof interiors between drawers
  • All wood drawers with dovetail joints in front & rear
  • All wood, waxed, hand fitted drawer guide system for smooth operation
  • Aligned drawers and doors
  • Lingerie-smooth, sanded & waxed drawer interiors
  • Three-ply drawer bottoms
  • Corner Blocking and glue blocks for strength
  • Hand finished surfaces
  • Nailed or screwed back panels rather than staples
  • Double doweled construction
  • Veneer pattern matching on dining table tops
  • Full aproned dining table leaves
  • Heavy duty table slides
  • Depth and clarity to the finish
  • Board selection that matches

Back to top


Buying a Home Entertainment Center

Look for these features when shopping home entertainment centers.

  • Kiln dried all wood construction
  • Dust proof interiors between drawers
  • All wood drawers with English dovetail joints in front & rear
  • All wood, waxed, hand fitted drawer guide system for smooth operation
  • Lingerie-smooth, sanded & waxed drawer interiors (this is design dependent)
  • Three-ply drawer bottoms
  • Corner Blocking and glue blocks for strength
  • Hand finished surfaces
  • Nailed or screwed back panels rather than staples
  • Levelers on the bottom
  • Double doweled construction
  • Numbered dining table leaves
  • Veneer pattern matching on dining table tops
  • Full aproned dining table leaves
  • Heavy duty table slides
  • Depth and clarity to the finish
  • Board selection that matches
  • Pocket doors
  • Vented panels
  • Built in electrical outlets
  • Adjustable shelves
  • Pull out media shelves
  • Interchangeable wood panel or speaker cloth panels
  • Media storage

Back to top


Buying Upholstered Furniture


Watch These Videos


Disclaimer: This is how the Century Signature is made and is representative of some of our finest upholstery.

 

Look for these features when buying upholstered furniture.

  • Kiln-dried hardwood frames
  • Glued and corner blocked joints
  • Joints with screws and glued double dowels
  • 8-way hand tied coil springs or high quality sinuous wire decking (style/design dependent)
  • Non-absorbent and odor free webbing for coil base
  • Fire retardant polyester fiber for seat deck
  • Adequate edge roll along front of chairs and sofas
  • High resiliency foam seat cushions with choice of firmness
  • High quality synthetic or down backfill
  • Matched fabric patterns
  • Even skirts that are lined on tailored items
  • Padded arms and backs
  • Arm covers available
  • Trim choices like fringe and welt cords
  • Padded outside arm and back panels

Back to top


Buying Mattress Sets

Look for these features when buying mattress sets.

  • A reputable store with a knowledgeable sales staff.
  • Comfort… lie down on each model for several minutes and turn from side to side to check for comfort and support in all positions. Take your partner and try out the models together.
  • If the mattress is innerspring it should be at least 9 inches thick. Check coil counts: full-size should have at least 300, queen size at least 375 and king size at least 450. Check size or gauge of the coils. 
  • Buy a complete set, not just the mattress.
  • Shop for the best value, not the lowest price. Spend as much as your budget can afford. The material used, the quality construction and the size determine mattress prices.
  • Check the edge support.
  • Can the king size mattress be partially bent for delivery?
  • Inspect the tailoring of the surface fabric and the quilting.

Back to top


Buying a Recliner

Look for these features when buying a recliner.

Comfort: The height and angle of the seat back and the depth of the seat affect comfort. Consider softness and bounce. Any metal parts should be smooth with no sharp edges. Backs should be free of bumps and hard spots.

Frame:

  • Frames should constructed of Kiln dried hardwood (oak, maple and ash are the most common), steel, plastic, or laminated boards to avoid warping.
  • A good frame is joined using dowels as well as corner blocks glued and screwed together.
  • Frame should have a heavy balanced feeling. The legs should be squared and sturdy to prevent wobbling. Frames should not creak.

Required chair dimensions: (L x W x H)

Recliners: can be constructed with one of three mechanisms:

  • The two-way mechanism: Allows the chair to open into a reading position with the ottoman up or in a fully reclining position. These chairs require space behind them to be opened.
  • WallLounger or WallSaver: A multi-position mechanism opens forward so that the chair can be placed in close proximity to the wall. The mechanism in these chairs will often be opened with a handle or button. When opened with the ottoman up, the chair back can be adjusted to recline to different degrees by pulling the arms forward.
  • The rocker mechanism is a multi-position mechanism that allows the chair to rock until the ottoman is opened. These chairs require space behind them to be opened. Swivel bases are often available with rocker recliners.

Mechanisms to open the chair work smoothly. Moving parts clear fabric to prevent tearing.

Support: Types of support include: webbing, sling straps, slats or springs. The type of support used will depend upon the design, size and amount of support or softness of the piece.

Springs: The quality and quantity of springs utilized is more an issue than which system is used. The primary spring systems used in upholstered furniture include:

  • Eight-way hand-tied and no-sag or sinuous. Eight-way hand-tied springs are considered a sign of quality due to their comfort and durability. These coils are attached to webbing on the bottom of the sofa or chair and tied with twine to surrounding coils in eight different spots to prevent shifting.
  • No-sag, or sinuous springs are "S" shaped wires that are fastened to the top of the front rail and run from the front to the back of the piece every few inches apart. These springs are less costly but not necessarily a sign of an inferior product.

Cushioning: The padding of a frame affects comfort and durability. The frame should be padded such that no fabric touches wood. This prevents untimely fabric wear and adds to comfort and softness. Cotton and polydacron are the most popular frame padding materials.

Back to top


Buying Leather Furniture

Look for these features when buying leather furniture.

  • Top grain leather is the most dense and durable section of the leather hide. Top grain is the natural top surface of the hide with a denser cell structure, creating the leather's tensile strength.
  • If splits are used, they should only be used on the outside arms or backs. As with upholstered furniture you want hardwood frames, coil spring base construction, high-density polyurethane seat cushions with coil spring inserts for comfort and durability. The cushions should be guaranteed for the life of the piece.
  • The cost of leather is determined by the origin of the animal and by supply and demand. In order, Northern European hides are considered premium select with the least imperfection.
  • United States domestic hides are selected in the mid-range. Southern American, Southeast Asian, Australian and North African hides contain the greatest number of imperfections and are the least costly.

Back to top